Lexmark C4352 Users Guide - Page 168
Remove USB., Continue, CAUTION-SHOCK, HAZARD
View all Lexmark C4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Troubleshoot a problem Error codes 39.1 42.xy 43.40, 43.41, 43.42, 43.43 43.40, 43.41, 43.42, 43.43 55.1 55.2 58 168 Error message Solution Complex page, some data may Try one or more of the following: not have printed. • Touch Continue to clear the message and continue printing. • Cancel the current print job. • Install more printer memory. • Reduce the complexity and size of the print job before sending it to print again. - Reduce the number of pages in the print job. - Reduce the number and size of any downloaded fonts. - Delete any unnecessary fonts or macros from the print job. - Reduce the number of graphics in the print job. Replace [color] cartridge, See "Replace cartridge, printer printer region mismatch. region mismatch" on page 212. Replace defective [color] See "Replacing a toner cartridge" on cartridge. page 122. [Color] cartridge problem. 1 Open door B. 2 Remove the cartridge. 3 Insert the cartridge. 4 Close door B. If the problem persists, then replace the cartridge. Error reading USB drive. Remove USB. Remove the flash drive to continue. Error reading USB hub. Remove hub. Remove the USB hub to continue. Too many trays attached. 1 Turn off the printer, and then unplug the power cord from the electrical outlet. 2 Remove one or more trays. 3 Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION-SHOCK HAZARD: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.