Lexmark C4352 Users Guide - Page 169

Troubleshoot a problem 169 Error codes 59 61 62 63 80.01, 80.09 80.11, 80.19 80.21, 80.29 80.31 82.00, 82.02, 82.09 82.12, 82.13, 82.19, 82.20, 82.22, 82.23, 82.29 82.30, 82.30, 82.33, 82.39, 82.40, 82.42, 82.49 Error message Incompatible tray [x]. Solution 1 Turn off the printer, and then unplug the power cord from the electrical outlet. 2 Remove the indicated tray. 3 Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION-SHOCK HAZARD: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. Defective disk. Replace the defective storage drive. Disk full. Try one or more of the following: • Touch Continue to clear the message. • Delete fonts, macros, and other data stored in the printer hard disk. • Install a printer hard disk. Format the disk. Formatting now wipes all information from the storage drive. To format the storage drive later, do the following: 1 From the home screen, touch Settings > Device > Maintenance > Out of Service Erase. 2 Touch Sanitize all information on hard disk, and then touch ERASE. Maintenance kit nearly low. Touch Continue to clear the Maintenance kit low. message. Maintenance kit very low. Replace maintenance kit, See "Ordering a fuser maintenance recommended life exceeded. kit" on page 121. Waste toner bottle nearly Touch Continue to clear the full. message. Waste toner bottle almost full. Replace waste toner bottle. See "Replacing the waste toner bottle" on page 144.