Lexmark C4352 Users Guide - Page 25

Set up, install, and configure 25 3 Apply the changes. Setting up and using the accessibility features Activating Voice Guidance From the home screen 1 In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message. Note: For printer models without built-in speakers, use headphones to hear the message. 2 Using two fingers, touch OK. Note: If the gesture does not work, then apply more pressure. From the keyboard 1 Press and hold the 5 key until you hear a voice message. Note: For printer models without built-in speakers, use headphones to hear the message. 2 Press Tab to navigate the focus cursor to the OK button, and then press Enter. Notes: • When Voice Guidance is activated, always use two fingers to select any item on the display. • Voice Guidance has limited language support. Deactivating Voice Guidance 1 In one motion and using one finger, slowly swipe left then up on the display until you hear a voice message. Note: For printer models without built-in speakers, use headphones to hear the message. 2 Using two fingers, do either of the following: • Touch Voice Guidance, then touch OK. • Touch Cancel. Note: If the gesture does not work, then apply more pressure. You can also deactivate Voice Guidance by doing either of the following: • Using two fingers, double tap the home screen. • Press the power button to put the printer in Sleep or Hibernate mode. Navigating the screen using gestures Notes: • Most of the gestures are applicable only when Voice Guidance is activated. • Enable Magnification to use the zoom and pan gestures. • Use a physical keyboard to type characters and adjust certain settings.