Lexmark C4352 Users Guide - Page 92

Use printer menus 92 Menu item Description Auto CR after LF On Off* Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR On Off* Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign Tray [x] Assign Manual Paper Assign Manual Envelope Configure the printer to work with a different print driver or custom application that uses a different set of source assignments to request a given paper source. Tray Renumber View Factory Defaults Show the factory default value assigned for each paper source. Tray Renumber Restore Defaults Restore the tray renumber values to their factory defaults. Print Timeout Off On* (90 seconds) Set the printer to end a print job after it has been idle for the specified amount of time. Note: An asterisk (*) next to a value indicates the factory default setting. Image Menu item Description Auto Fit On Off* Select the best available paper size and orientation setting for an image. Note: When set to On, this menu item overrides the scaling and orientation settings for the image. Invert Off* On Invert bitonal monochrome images. Note: This menu item does not apply to GIF or JPEG image formats. Scaling Anchor Top Left Best Fit* Anchor Center Fit Height/Width Fit Height Fit Width Adjust the image to fit the printable area. Note: When Auto Fit is set to On, Scaling is automatically set to Best Fit. Note: An asterisk (*) next to a value indicates the factory default setting.