Lexmark C734 User Guide - Page 16
Installing a memory card, Warning-Potential Damage, CAUTION-SHOCK HAZARD
View all Lexmark C734 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Additional printer setup 16 2 Use the following illustration to locate the appropriate connector. Warning-Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. 1 Firmware and flash memory card connectors 2 Hard disk connector 3 Internal print server connector 4 Memory card connector 5 Dust cover Installing a memory card CAUTION-SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning-Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. An optional memory card can be purchased separately and attached to the system board. To install the memory card: 1 Access the system board. 2 Unpack the memory card. Note: Avoid touching the connection point along the edge of the card.