Lexmark C736dn User's Guide - Page 164
Remove all color supplies, Remove paper from standard output bin, Remove packaging material
View all Lexmark C736dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Remove all color supplies The printer is set for Color Lock Out printing in the Config menu. Try one of the following methods: • Remove all color toner cartridges and photoconductor units. Note: Do not remove the black toner cartridge or photoconductor unit. • Press the up or down arrow button until Continue appears, and then press in Color Lock Out mode. to clear the message and print Remove paper from standard output bin Remove the stack of paper from the standard exit bin. Remove packaging material, check 1 Remove all packing material from the printer. 2 Make sure the fuser, transfer module, trays, and supplies are installed correctly. 3 Press the up or down arrow button until Show Areas appears, and then press . Securely clearing disk space The printer hard disk wiping process needs to recover. The message clears when all blocks are cleared. Restore Held Jobs? • Press the up or down arrow button until on the printer hard disk. • Press the up or down arrow button until restored. Restore appears, and then press to restore all held jobs stored Do not restore appears, and then press . No print jobs will be Some held jobs were not restored Press the up or down arrow button until Continue appears, and then press to delete the specified job. Unsupported disk An unsupported printer hard disk has been installed. Remove the unsupported device, and then install a supported one. Unsupported mode, unplug and change mode Make sure that the camera is in a valid mode for PictBridge. Unsupported USB hub, please remove Remove the unrecognized USB hub. Troubleshooting 164