Lexmark C925 Quick Reference - Page 5
paper jam, paper jam
View all Lexmark C925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Area Jam numbers What to do 4 250 1 Remove all media from the multipurpose feeder. 2 Flex and stack the media. 3 Reload paper or media in the multipurpose feeder. 4 Adjust the paper guides. 5 Touch Continue, jam cleared. 200 paper jam 1 Open the side door. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Pull the jammed paper up and out to remove it from the paper path. 201 paper jam 1 Open the side door. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Determine where the jam is located, and then remove it: a If the paper is visible under the fuser, then grasp it on each side and pull it out. b If the paper is not visible, then you will need to remove the fuser unit. Warning-Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser. Notes: • Make sure all paper fragments are removed. • If the page is in the fuser, the fuser nip release lever should be lowered and should be switched to envelope mode. • After removing the jammed page, return the lever to the proper position. 3 Close the side door. 4 Touch Continue, jam cleared. 5 1 Lift the handles on each side of the fuser, and then pull to remove the fuser unit. 2 Remove the jammed paper. Notes: • Make sure all paper fragments are removed. • Pull the jammed paper downwards. • If the paper is in the fuser, then the fuser nip release lever should be lowered and should be switched to envelope mode. • After removing the jammed paper, return the lever to the proper position.