Lexmark E260dn Quick Reference - Page 3

7 Insert the tray. the manual feeder to quickly print on paper types or sizes that are not currently loaded in the tray. 1 Open the manual feeder door. 8 If a different type of paper was loaded than the type previously loaded in the tray, change the Paper Type setting. Note: The difference between the standard 250-sheet tray and the optional 250- and 550-sheet trays is that the standard tray accommodates up to 150 sheets of A6-size paper, so the width guides slide farther to the center of the tray. Using the manual feeder The manual feeder is located inside the manual feeder door of the printer and can feed only one sheet of paper at a time. You can use 2 When the light is lit, load the paper faceup into the center of the manual feeder. 3 Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides. 4 Adjust the paper guides to the paper width. Warning-Potential Damage: Do not force the paper into the feeder. Forcing the paper causes jams. Using the standard exit bin and paper stop The standard exit bin holds up to 150 sheets of 20 lb paper. It collects print jobs facedown. The standard exit bin includes a paper stop that keeps paper from sliding out the front of the bin as it stacks. The paper stop also aids in neater stacking of the paper. Notes: • Load letterhead faceup, with the top of the sheet entering first. • Load envelopes with the flap side down and with the stamp area as shown. Loading paper and specialty media 3