Lexmark MX722 Users Guide PDF - Page 210
Step 1, Step 2, Settings, Print, Quality, Step 3, Notes, Step 4, Print Resolution
View all Lexmark MX722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Troubleshooting 210 Action Yes Step 1 Go to step 2. a Check if the printer is using a genuine and supported Lexmark toner cartridge. Note: If the cartridge is not supported, then install a supported one. b Print the document. Is the print light? Step 2 Go to step 3. a Turn off the printer, wait for about 10 seconds, and then turn on the printer. b Increase toner darkness. From the control panel, navigate to: Settings > Print > Quality c Print the document. Is the print light? Step 3 Go to step 4. a Depending on your operating system, specify the paper type from the Printing Preferences or Print dialog. Notes: • Make sure that the setting matches the paper loaded. • You can also change the setting on the printer control panel. b Print the document. Is the print light? Step 4 Check if the print resolution is set to 600 dpi. a From the control panel, navigate to: Settings > Print > Quality > Print Resolution b Print the document. Go to step 5. Is the print light? No The problem is solved. The problem is solved. The problem is solved. The problem is solved.