Lexmark MX722 Users Guide PDF - Page 59
Adjusting the fax darkness, Viewing a fax log, Blocking junk faxes, Holding faxes, Forwarding a fax
View all Lexmark MX722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Faxing 59 Adjusting the fax darkness 1 Load an original document into the ADF tray or on the scanner glass. 2 From the home screen, touch Fax, and then enter the needed information. 3 Adjust the Darkness setting. 4 Send the fax job. Viewing a fax log Note: You may need administrative rights to view the fax logs. 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Reports > Fax. 3 Click Fax Job Log or Fax Call Log. Blocking junk faxes 1 From the home screen, touch Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls > Block No Name Fax. 2 Apply the changes. Holding faxes 1 From the home screen, touch Settings > Fax > Analog Fax Setup > Fax Receive Settings > Holding Faxes. 2 Select a mode. Forwarding a fax 1 From the home screen, touch Settings > Fax > Analog Fax Setup > Fax Receive Settings > Admin Controls. 2 Configure the Fax Forwarding, Forward To, and Forward to Shortcut settings. 3 Apply the changes.