Lexmark T652DTN Clearing Jams Guide - Page 5

paper jam, 279 paper jams, paper jams, paper jam

Page 5 highlights

260 paper jam The envelope feeder feeds envelopes from the bottom of the stack; the bottom envelope will be the one that is jammed. 1 Lift the envelope weight, and then remove all the envelopes. 271-279 paper jams To clear a jam in the output expander, high-capacity output stacker, the 5-bin mailbox, or the StapleSmart II Finisher: 1 If the paper is exiting into a bin, then pull the paper straight out, and then press . If not, then continue with step 2. 2 Pull down the output bin door or doors. 3 Remove the jammed paper. 4 Close the output bin door or doors. 5 Press . 280 paper jams 1 Pull down the StapleSmart II Finisher door. 2 If the jammed envelope has entered the printer and cannot be pulled out, then lift the envelope feeder up and then out of the printer, and then set it aside. 3 Remove the envelope from the printer. Note: If you cannot remove the envelope, then the print cartridge will have to be removed. For more information, see "200 and 201 paper jams" on page 1. 4 Reinstall the envelope feeder. Make sure it snaps into place. 5 Flex and stack the envelopes. 6 Load the envelopes in the envelope feeder. 7 Adjust the paper guide. 8 Lower the envelope weight. 9 Press . 2 Remove the jammed paper. 3 Close the StapleSmart II Finisher door. 4 Press . 281 paper jam 1 Clear the jam from the stapler output bin. 2 Press . 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

260 paper jam
The envelope feeder feeds envelopes from the bottom of the
stack; the bottom envelope will be the one that is jammed.
1
Lift the envelope weight, and then remove all the envelopes.
2
If the jammed envelope has entered the printer and cannot be
pulled out, then lift the envelope feeder up and then out of the
printer, and then set it aside.
3
Remove the envelope from the printer.
Note:
If you cannot remove the envelope, then the print
cartridge will have to be removed. For more information, see
“200 and 201 paper jams” on page 1.
4
Reinstall the envelope feeder. Make sure it
snaps
into place.
5
Flex and stack the envelopes.
6
Load the envelopes in the envelope feeder.
7
Adjust the paper guide.
8
Lower the envelope weight.
9
Press
.
271–279 paper jams
To clear a jam in the output expander, high-capacity output
stacker, the 5-bin mailbox, or the StapleSmart II Finisher:
1
If the paper is exiting into a bin, then pull the paper straight
out, and then press
.
If not, then continue with step 2.
2
Pull down the output bin door or doors.
3
Remove the jammed paper.
4
Close the output bin door or doors.
5
Press
.
280 paper jams
1
Pull down the StapleSmart II Finisher door.
2
Remove the jammed paper.
3
Close the StapleSmart II Finisher door.
4
Press
.
281 paper jam
1
Clear the jam from the stapler output bin.
2
Press
.
5