Lexmark XC4352 Users Guide - Page 262

Troubleshoot a problem Error codes 59 61 62 63 71.01 71.02 71.03 71.06 262 Error message Incompatible tray [x]. Solution 1 Turn off the printer, and then unplug the power cord from the electrical outlet. 2 Remove the indicated tray. 3 Connect the power cord to the electrical outlet, and then turn on the printer. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. Defective disk. Replace the defective storage drive. Disk full. Try one or more of the following: • Touch Continue to clear the message. • Delete fonts, macros, and other data stored in the printer hard disk. • Install a printer hard disk. Format the disk. Formatting now wipes all information from the storage drive. To format the disk, do the following: 1 From the home screen, touch Settings > Device > Maintenance > Out of Service Erase. 2 Touch Sanitize all information on hard disk, and then touch ERASE. Fax Station Name not set up. Contact system administrator. See "Setting up the fax function using analog fax" on page 31. Fax Station Number not set up. Contact system administrator. No analog phone line connected to modem, fax is disabled. Check the connection and the line for a signal. For more information, see "Setting up fax using a standard telephone line" on page 33. Unable to connect to HTTPS Connection to HTTPS Fax Server is Fax Server. disconnected. Check the Internet connection of the printer.