Lexmark XC4352 Users Guide - Page 37
Connecting to a distinctive ring service, Setting the fax date and time
View all Lexmark XC4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Set up, install, and configure 37 1 Connect one end of the telephone cable to the line port of the printer. 2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack. 3 If you want to connect another device with a non‑RJ‑11 connector to the same wall jack, then connect it directly to the telephone adapter. Connecting to a distinctive ring service A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone number is assigned a different ring pattern. Note: These instructions apply only to printers that support analog fax. For more information, see "Supported fax" on page 31. 1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls > Answer On. 2 Select a ring pattern. Setting the fax date and time Note: Make sure that fax is configured. For more information, see the Setting up the printer to fax section. 1 From the home screen, touch Settings > Device > Preferences > Date and Time > Configure. 2 Configure the settings. Configuring daylight saving time Note: Make sure that fax is configured. For more information, see the Setting up the printer to fax section. 1 From the home screen, touch Settings > Device > Preferences > Date and Time > Configure. 2 In the Time Zone menu, touch (UTC+user) Custom. 3 Touch UTC (GMT) Offset, and then configure the settings. Configuring the fax speaker settings Note: Make sure that fax is configured. For more information, see the Setting up the printer to fax section. 1 From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings. 2 Do the following: • Set Speaker Mode to Always On. • Set Speaker Volume to High. • Enable Ringer Volume.