Lexmark XC4352 Users Guide - Page 306
Parallel or serial interface card does not operate correctly, Defective flash detected
View all Lexmark XC4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
Troubleshoot a problem 306 Action Yes Step 3 Check the cable and the ISP connection. The problem is solved. a Use the correct cable, and then make sure that it is securely connected to the ISP. b Check if the ISP solution interface cable is securely connected into the receptacle of the controller board. Does the ISP operate correctly? No Contact customer support. Parallel or serial interface card does not operate correctly Action Yes Step 1 Go to step 3. Print a menu settings page, and then check if the parallel or serial interface card appears in the Installed Features list. Is the parallel or serial interface card listed in the Installed Features list? Step 2 Remove, and then install the parallel or serial interface card. The problem is solved. For more information, see "Installing an internal solutions port" on page 68. Does the parallel or serial interface card operate correctly? Step 3 The problem is Check the connection between the cable and the parallel or serial solved. interface card. Does the parallel or serial interface card operate correctly? No Go to step 2. Go to step 3. Contact customer support. Defective flash detected Try one or more of the following: • Replace the defective intelligent storage drive. • From the home screen, touch Continue to ignore the message and continue printing. • Cancel the current print job. Not enough free space in flash memory for resources Try one or more of the following: • Touch Continue to clear the message and continue printing. • Delete fonts, macros, and other data stored in the flash memory. • Install a hard disk.