Lexmark XC4352 Users Guide - Page 263

Troubleshoot a problem 263 Error codes 71.12 71.13 72.01 80.01, 80.09 80.11, 80.19 80.21, 80.29 80.31 82.00, 82.02, 82.09 82.12, 82.13, 82.19, 82.20, 82.22, 82.23, 82.29 82.30, 82.30, 82.33, 82.39, 82.40, 82.42, 82.49 84.01, 84.09 84.11, 84.13, 84.19 84.21, 84.23, 84.29 84.31, 84.33, 84.41, 84.43, 84.48 Error message Solution Memory full, cannot print Touch Print All to print as many of the faxes. faxes as have been saved. Memory full. Cannot send faxes. Try one or more of the following: • Continue and try sending the fax again. • Scan the original document one page at a time, dial the fax number, and then scan the document. E-mail SMTP server not set up. Contact system administrator. Try either of the following: • Set up your e‑mail function. For more information, see "Configuring the e‑mail SMTP settings" on page 38. • Disable the error message. For more information, see "Disabling the 'SMTP server not set up' error message" on page 311. Maintenance kit nearly low. Touch Continue to clear the message. Maintenance kit low. Touch Continue to clear the message. Maintenance kit very low. Touch Continue to clear the message. Replace maintenance kit, See "Ordering a fuser maintenance recommended life exceeded. kit" on page 203. Waste toner bottle nearly Touch Continue to clear the full. message. Waste toner bottle almost Touch Continue to clear the full. message. Replace waste toner bottle. See "Replacing the waste toner bottle" on page 225. Black imaging unit or color Touch Continue to clear the imaging kit nearly low. message. Black imaging unit or color Touch Continue to clear the imaging kit low. message. Black imaging unit or color Touch Continue to clear the imaging kit very low. message. Replace black imaging unit or color imaging kit. • See "Replacing the black imaging unit" on page 207. • See "Replacing the color imaging kit" on page 216.