Linksys SGE2000 Cisco RPS1000 380W Redundant Power Supply Administration Guide - Page 15

Chapter RPS1000-Business Series 380W RPS Unit Installation & Administration 3 WARNING: This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. WARNING: The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. WARNING: This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this equipment. WARNING: Ultimate disposal of this product should be handled according to all national laws and regulations. WARNING: No user-serviceable parts inside. Do not open. WARNING: Installation of the equipment must comply with local and national electrical codes. In addition, you should always follow these guidelines: • Do not work alone if potentially hazardous conditions exist. • Never assume that power is disconnected from a circuit. Always check. Chapter 3: Installation 12 Preparing for Installation