Linksys SGE2000 Cisco RPS1000 380W Redundant Power Supply Administration Guide - Page 7

Chapter RPS1000-Business Series 380W RPS Unit Installation & Administration 2 The RPS1000 has these features: • Six output channels to support multiple devices • RPS1000 status information available through the network management application on the device • Front-panel LEDs to show status for each output channel, internal power supplies, fans, and temperature • Quick switch over capability to ensure that the switch does not reboot if the internal switch power supply should fail • Support for the SFE2000/2000P and SGE2000/2000P Ethernet switches • Small form-factor suitable for rack-mounting to provide maximum wiring closet port density • Two output levels: - -48 VDC / 5.6A - 12 VDC / 8.5A The two output levels provide a maximum total output power of 380 W. The -48 VDC mode powers telephone systems in Power over Ethernet (PoE) switches. • A single 48-inch (1.2-meter) 16-pin-to-14-pin connector cable (part number: RPSCBL1) to allow connection to an external device. Additional cables can be ordered separately. Chapter 2: Product Overview 4 Features