Linksys SGE2000 Cisco RPS1000 380W Redundant Power Supply Administration Guide - Page 9

Chapter RPS1000-Business Series 380W RPS Unit Installation & Administration 2 LED Off Green FAN The The fan is RPS1000 is running. not powered up. STBY/ACTIVE Button Amber The fan is not operating properly. Color Off Green Blinking green Blinking amber Amber DC Output Status No device is connected to the output connector. A device is connected to the output connector. The RPS1000 is unavailable to the connected device. The RPS1000 is providing power to another connected device. The RPS1000 is providing power to the connected device; the output is active. The RPS1000 is in standby mode or in a fault condition. The RPS1000 has a front panel STBY/ACTIVE button. NOTE: The RPS1000 is in active mode (STBY/ACTIVE LED green) when it powers up. It must be in standby mode every time you connect devices to it. If you connect a device to the RPS1000 when it is in active mode (STBY/ACTIVE LED green), the RPS1000 might unnecessarily begin supplying backup power to the device. This situation might occur if you connect the device before it is powered up, or if the RPS1000 does not immediately sense that the device power supply was supplying power. In this case, the RPS1000 would not be available as a backup power source for other connected devices. Press the STBY/ACTIVE button to change the RPS1000 from active mode to standby mode when you connect devices. When you change the mode to active, the STBY/ACTIVE LED turns green. Chapter 2: Product Overview 6 Front-Panel Description