Linksys SPA-841 Cisco SPA9000 Voice System Administration Guide - Page 233
Vertical Service Activation Codes
View all Linksys SPA-841 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
SPA9000 Field Reference Voice tab B CPC Duration Duration in seconds for which the tip-to-ring voltage is removed after the caller hangs up. After that, tip-to-ring voltage is restored and dial tone applies if the attached equipment is still off-hook. CPC is disabled if this value is set to 0. Range: 0 to 1.000 second. Resolution is 0.001 second. Default: 0 (CPC disabled) Voice tab > Regional page Vertical Service Activation Codes section NOTE Vertical Service Activation Codes are automatically appended to the dial-plan. There is no need to include them in dial-plan, although no harm is done if they are included. Call Return Code This code calls the last caller. Call Redial Code Default: *69 Redials the last number called. Blind Transfer Code Default: *07 Begins a blind transfer of the current call to the extension specified after the activation code. Call Back Act Code Default: *98 Starts a callback when the last outbound call is not busy. Call Back Deact Code Default: *66 Cancels a callback. Default: *86 Call Back Busy Act Code Starts a callback when the last outbound call is busy. Cfwd All Act Code Default: *05 Forwards all calls to the extension specified after the activation code. Cfwd All Deact Code Default: *72 Cancels call forwarding of all calls. Cfwd Busy Act Code Default: *73 Forwards busy calls to the extension specified after the activation code. Default: *90 SPA9000 Voice System Administration Guide 231