Linksys SPA922 Cisco Small Business IP Phone SPA9X1 Administration Guide - Page 28
Back Panel, SPA922 - poe
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 2 Getting Started Back Panel Linksys 900 Series IP Phones SPA922 Port Phone jack Ethernet ports Power Function Connects to the handset. Connects to the SPA9000 through a local switch. The SPA922 has two ports. Use the other port to connect to a PC or other LAN device. Connect to the 5-volt power supply. The SPA922 is similar to the SPA921, but provides Power over Ethernet (PoE) and an extra Ethernet port for connecting another device to the LAN (see Figure 2-3). The SPA100 power supply must be ordered separately if you are not using a PoE switch. Figure 2-3 SPA922 SPA932 The SPA932 is a 32-button attendant console for the SPA962, providing 32 three-color (red, green, and amber) programmable LEDS, with support for Broadsoft Busy Lamp Field and Asterisk Line Monitoring (see Figure 2-4). The SPA932 attaches to the SPA962 with the attachment arm provided (not shown). It obtains power directly from the SPA962 and does not require a separate power supply. Two SPA932 units can be attached to a single SPA962 to monitor a total of 64 separate lines. Firmware Version 5.1 Linksys IP Phone Administrator Guide 2-5