Linksys WAP11 User Guide - Page 15

The Password Tab The Password tab, shown in Figure 6-8, allows you to change the Access Point's password and restore factory defaults. Changing the password for the Access Point is as easy as typing the password into the AP Password field. Then, type it again into the second field to confirm. To restore the Access Point's factory default settings, click the Yes button beside Restore Factory Defaults. Important: Restoring the Access Point's factory defaults will erase all of your settings (WEP Encryption, Wireless and LAN settings, etc.), replacing them with the factory defaults. Do not reset the Access Point if you want to retain these settings The Status Tab The Status tab, shown in Figure 6-9, will display current information on the Access Point, its settings, and its performance. Figure 6-8 Click the Apply button to apply your changes or Cancel to cancel your changes. If you require online help, click the Help button. 22 Figure 6-9 • Firmware Version. This displays the current version of the Access Point's firmware. Firmware should only be upgraded if you experience problems with the Access Point and can be upgraded from the Help tab. LAN • IP Address. This IP address is the unique IP address of the Access Point. • Subnet Mask. The Access Point's Subnet Mask (also known as an IP Mask), matches the Subnet Mask of your Ethernet network. 23