Lowrance HDS-12 Carbon Operators Manual EN - Page 86
Stop sonar, Advanced StructureScan settings, Surface clarity, Noise rejection
View all Lowrance HDS-12 Carbon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Stop sonar Use the Stop sonar menu option when you want to turn off the StructureScan transducer, but not turn off the unit. Advanced StructureScan settings Surface clarity Wave action, boat wakes and temperature inversions can cause onscreen clutter near the surface. The surface clarity option reduces surface clutter by decreasing the sensitivity of the receiver near the surface. Ú Note: By default, surface clarity is set to Low, for optimal image return and clarity. Noise rejection Signal interference from bilge pumps, engine vibration and air bubbles can clutter the sonar screen. The noise rejection option filters the signal interference and reduces on-screen clutter. Ú Note: By default, Noise rejection is set to on, for optimal signal returns and clarity. Flipping the Structure image left/right If required, the left/right SideScanning images can be flipped to match the direction of the transducer installation. Range Lines Range lines can be added to the image to make it easier to estimate depth (Downscan) and distance (SideScan). Preview You can turn off sonar history preview, have it always shown at the top of the screen, or have it appear only when the cursor is active. By default, the sonar history preview appears when the cursor is active. 86 StructureScan | HDS Carbon Operator Manual