Lowrance HOOK Reveal 7 SplitShot HOOK Reveal Series Operator Manual - Page 62
More options, Flipping the image left/right, Range Lines, Palettes, View, Measuring distance
View all Lowrance HOOK Reveal 7 SplitShot manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
More options Flipping the image left/right If required, flips the left/right side of the image to match the direction of the transducer installation. Range Lines Range lines can be added to the image to make it easier to estimate distance. Palettes You can select between several display palettes. View Specifies if the SideScan page displays the left side of the image only, right side only, or left and right side at the same time. Measuring distance The cursor can be used to measure the distance between the position of two observations on the image. 1. Position the cursor on the point from where you want to measure the distance 2. Start the measuring function from the More options menu option Ú Note: The measure function is not available in the menu unless the cursor is placed on the image. 3. Position the cursor on the second measuring point - A line is drawn between the measuring points, and the distance listed in the Cursor Information window 4. Continue selecting new measuring points if required You can use the menu to re-position the start point and the end point as long as the measuring function is active. When you select Finish measuring or press the Exit (X) key, the measuring function stops. Press the Cursor/Waypoint key to remove the cursor from the image and the image resumes to normal scrolling. 62 SideScan | Hook Reveal Series Operator Manual