Magnavox AJ3720 User manual, English (US) - Page 10

English RADIO ALARM TUNING TO A STATION MANUAL tuning This is useful if you know the radio frequency of the station. 1. Press the TUNING / ∞ or § control briefly until you find the desired station. AUTOMATIC tuning 1. Keep TUNING / ∞ or § pressed until the display frequency starts to run and then release. - The display will show Srch. 2. When a station has been found, tuning will stop, or you can stop the automatic tuning by pressing the TUNING / ∞ or § control again. Repeat until you have found the desired station. Preset stations Storing preset stations You can programme up to five stations from one or more bands. You can also replace a preset station with another frequency. The preset number of the station selected will be indicated in the display. 1. Select and press a preset button 1 to 5. 2. Follow steps 1 to 4 under RADIO RECEPTION and tune to the station either manually or automatically. 3. Press the SET button to confirm the preset number and station while the display shows the desired frequency. ™ The preset number indication will blink once. Selecting preset stations • Select and press a preset button (1 -5) to recall the corresponding frequency and waveband stored. PRESET 1 2 AJ3720 PLL D 3 4 5 P1 P2 P3 P4 P5 FM MHz SETTING THE ALARM TIME General Two different alarm times can be set in a variety of modes. This can be useful when for example you need to be woken up at a different time during the week or at the weekend. Note: To set the alarm, complete each step within 10 seconds. Setting alarm 1 or 2 1. Press the ALARM 1 or 2 button. ™ The alarm time appears in the display ALARM 1 ALARM 2 TUNING / VOLUME ALM 1 AM ALM 2 10