Magnavox AJ3720 User manual, English (US) - Page 8
Setting Data
View all Magnavox AJ3720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English SETTING DATA SETTING THE TIME, DATE AND YEAR General The data for the clock time, date and year need to be entered separately. Setting the time 1. If necessary, press the REPEAT ALARM/TIME DATE button until the display shows the time mode. - If the time display 12:00 is already flashing, go to step 3. 2. Press SET to activate the setting mode. ™ The time display will start flashing. 3. Use TUNING / ∞ or § to adjust the hours and minutes. - With TUNING / ∞ or § pressed, the display will increase or decrease the minutes and hours rapidly and continuously. M 2 - Press TUNING / ∞ or § briefly and repeatedly to adjust the time minute by minute. 4. Press SET when you have reached the correct time. Setting the date and year Both the day and the year display modes will be shown for 10 seconds, before reverting back to the clock time display. The date modes refer to the month and day. E.g. December 31st will be displayed as 12--31. • There is no need to adjust the days of the week (MON-SUN) as this is done automatically after you have set the date/year correctly. 1. Press the REPEAT ALARM/TIME DATE button repeatedly until the display shows the mode you wish to set (date/year). 2. Use TUNING / ∞ or § to adjust the month and day and the year. - With TUNING / ∞ or § pressed, the display will increase or decrease the days/years rapidly and continuously. - Press TUNING / ∞ or § briefly and repeatedly to adjust the display day by day or year by year. - Press SET when you have reached the correct date/year. 3. The date/year is now set. Press the REPEAT ALARM/TIME DATE button if you wish to return to the clock display immediately. REPEAT ALARM TIME DATE TUNING / WSELEEKEEPNEDR TUE 8