Magnavox MRD20037B99 User manual, English (US) - Page 29

Screen Saver, Video Out 29 Screen Saver The Screen Saver can appear if Disc playback is stopped or paused for more than one minute (and you do not use the DVD Receiver or its remote control). The Screen Saver is Off by default. To turn it On or Off, follow these steps. 1 While playback is stopped, press SYSTEM MENU. Press ; or - to select the icon. 2 Press 9 to select , then press :. 3 Press 9 to select SCR SAVER, then press :. 4 Press 9 or 8 to select ON or OFF, then press OK. 1-4 TV SHAPE TV SYSTEM VIDEO OUT SCR SAVER OFF ON SET SCREEN SAVER OFF 5 Press SYSTEM MENU to remove the menu. MUTE DISC TUNER TV/AV AUX 1 23 456 7 DISC MENU 89 SYSTEM 0 MENU 1,5 OK SURROUND SOUND NIGHT RESUME REPEAT REPEAT A-B SLEEP DIM SUBW CENTER REAR TV VOL Z VYideo Outd If you used Component Video or S-Video connections as described on pages 11-12, set VIDEO OUT to S-VIDEO or PR PB Y (for Component Video) by following the steps below. S-VIDEO is the default setting. 1 While playback is stopped, press SYSTEM MENU. Press ; or - to select the icon. 2 Press 9 to select , then press :. 3 Press 9 to select VIDEO OUT, then press :. 4 Press 9 or 8 to select S-VIDEO or PRPBY, then press OK. G Choose S-VIDEO if you connected the DVD Receiver's S-VIDEO OUT jack to the TV's S-Video In jack as described on page 12. S-VIDEO is the default setting of the DVD Receiver. G Choose PR PB Y if you connected the DVD Receiver's Pr/Cr Pb/Cb Y COMPONENT VIDEO OUT jacks to your TV's Component Video In jacks as described on page 11. G The SCART option is not available for this DVD Receiver. TV SHAPE TV SYSTEM VIDEO OUT SCR SAVER S-VIDEO PR PB Y/SCART Z Y d CVBS S-VIDEO 5 Press SYSTEM MENU to remove the menu. MUTE DISC TUNER TV/AV AUX 1 23 456 7 DISC MENU 89 SYSTEM 0 MENU 1,5 1-4 OK Helpful Hints • You only need one video connection between the TV and the DVD Receiver. You cannot use SVideo and Component Video at the same time. • If you used the yellow VIDEO OUT jack on the DVD Receiver to connect it to the TV, you do not need to adjust the VIDEO OUT setting.