Maytag MDB5651AWB Use and Care Guide - Page 6
Loading
View all Maytag MDB5651AWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Loading Adjustable Rack (select models) The Adjustabme Upper Rack (semect modems[} can be raised or lowered to accommodate taller plates, platters, pans, etc. optimizing useable space in both upper and lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position. Always adjust the upper rack before loading. To mower the rack: 1. Pull the rack fully out. 2. Place thumbs on each lever on the adjuster while holding rack with hands. Adjusters 3. Press down on the levers with thumbs and push rack down. The rack will come to a stop when it is in position. To raise the rack: 1. Pull the rack fully out. 2. Place hands on both sides and lift up until rack comes to a stop and latches in place. . The dishwasher will not operate correctmy if the rack wash arm connection is not amigned with one of the water intact homes on back wall of the dishwasher. The left and right side adjusters on the racks must both be fully in the upward or downward position for proper connection. Removing the Upper Rack The rack can be removed when tail or oversized items need to be loaded into the lower rack. Unload the rack before removing it from the dishwasher. To remove rack with push tab rack stops (select modelsl}: . Roll the rack '/:_to '/_of the way out. 2_ To remove each plastic push tab rack stop from the end of each track, push inward (toward the rack} on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight ouL Take care to support the track while removing rack stops. Roll the rack all the way out of the track and remove from the dishwasher_ To replace: ...... Push Tab Rack Stop Reverse the above procedure to replace the rack into the dishwasher_ To remove tack with tab-lock tack stops (select models]l . Roll the rack 1/3 to 1/2 of the way out. 2_ Locate the rack stops at the end of each track. Squeeze the tab in the middle of the rack stop and pull the rack stop straight out. Take care to support the rack while removing the rack stops. Roll the rack all the way out of the track and remove from the Todrieshpwlaacseh: er_ I 1. Replace the dishwasher rack by guiding the wheels into the Tab Lock tracks. Rack Stop 1 Push each rack stop squarely into the end of the track until the catch pops into the small hole on the side of the track 5