Maytag MGD6300TQ Use and Care Guide - Page 13

the4plastic

Page 13 highlights

Youcanchangyeourdoosr wingfromaright-sidoepenintgoa left-sidoepeningif,desired. 1. Placaetoweol rsoftclothontopofthedryeor rworkspacteoprotectht esurface. Removtheedoorassembly 1. Openthedryedr oor. 2. Removtheebottomscrewfromeachofthe2 hingetshatattacthhedryedr ootrothefront paneo[fthedryer. 3. I.oosethnetopscrewfromeachofthe2 hingeisnStep2. 5. Removthee4plastipclugslocateodutsidtehedryedr ooropening. I1 II /4 B 6. Install 4 plastic plugs into screw holes in the dryer [eft where the hinges were removed in ./4 Step 4. Reverse the strike B 1. Remove the door strike from the dryer door opening. 2. Remove the cosmetic screw opposite the door strike. A. loosen these screws. A B. Remove these screws. 4. Remove the dryer door and the hinges by lifting upward on the door. I.ay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel. Reinstall the door 1. Remove the 4 screws and 2 hinges from the dryer door. A. Door strike B. Cosmetic screw 3. Reinstall the door strike and cosmetic screw on the opposite side of the dryer door opening from where they were removed. NOTE: Door strike and plugs must be on the same side of the dryer door opening.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Youcanchange
yourdoor
swing
fromaright-side
opening
toaleft-side
opening,
ifdesired.
1. Place
atowel
orsoftclothontopofthedryer
orworkspace
toprotect
thesurface.
Remove
thedoorassembly
1. Open
thedryer
door.
2. Remove
thebottom
screw
fromeachofthe2hinges
thatattach
thedryer
door
tothefront
pane[
ofthedryer.
3. I.oosen
thetopscrew
fromeachofthe2hinges
inStep2.
5. Remove
the4plastic
plugs
located
outside
thedryer
dooropening.
I1
II
/4
B
./4
B
6.
Install
4 plastic
plugs
into
screw
holes
in the dryer
[eft where
the
hinges
were
removed
in
Step 4.
Reverse the
strike
1.
Remove
the
door
strike
from
the dryer
door
opening.
2.
Remove
the
cosmetic
screw
opposite
the
door
strike.
4.
A. loosen
these
screws.
A
B. Remove
these
screws.
Remove
the
dryer
door
and the
hinges
by lifting
upward
on the
door.
I.ay the
door
on
a
flat,
protected
surface,
with
the
inside
of the
door
facing
up.
Remove
remaining
2 loose
screws
from
dryer
front
panel.
Reinstall
the door
1.
Remove
the 4 screws
and 2 hinges
from
the
dryer
door.
3.
A. Door
strike
B.
Cosmetic
screw
Reinstall
the
door
strike
and
cosmetic
screw
on the
opposite
side
of the
dryer
door
opening
from
where
they
were
removed.
NOTE:
Door
strike
and
plugs
must
be on
the
same side
of the dryer
door
opening.