Maytag MGD6300TQ Use and Care Guide - Page 23
From Inside, Dryer, Cabinet
View all Maytag MGD6300TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
From Inside the Dryer Cabinet I.int should be removed every 2 years, or more often, depending should be done by a qualified person. on dryer usage. Cleaning From the Exhaust Vent I.int should be removed every 2 years, or more often, depending on dryer usage. The dryer light automatically turns on inside the dryer drum when you open the door. To change the drum light 1. Unplug dryer or disconnect power. 2. Open the dryer door. I_ocate the light bulb cover on the back wall of the dryer. Remove the screw located in the lower right corner of the cover. Remove the cover. Vacation care Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should: 1. Unplug dryer or disconnect power. 2. Close shutoff valve in gas supply line. 3. Clean lint screen. See "Cleaning the I_int Screen." Moving care 1. Unplug the power supply cord. 2. Close shutoff valve in gas supply line. 3. Disconnect gas supply line pipe and remove fittings attached to dryer pipe. 4. Cap the open fuel supply line. 5. Make sure leveling legs are secure in dryer base. 6. Use masking tape to secure dryer door. 3. Turn bulb counterclockwise. Replace the bulb with a 1O-watt appliance bulb only. Replace the cover and secure with the screw. 4. Plug in dryer or reconnect power.