Maytag MGD6300TQ Use and Care Guide - Page 17
press ENID OF CYCI_E SIGNAl_.
View all Maytag MGD6300TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
To use a Sensor Dry Cycle • Press POWER. Turn the knob to desired Sensor Dry Cycle. Select I)RYNESS to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness [eve[. The default dryness setting is Normal when a Sensor Dry Cycle is selected. You can select a different dryness level, depending on your load, by pressing Dryness and choosing More, I.ess or Damp. Selecting More, I_ess or Damp automatically adjusts the sensed time needed. Once a dryness level is set, it cannot be changed without stopping the cycle. Select the desired Options. To make changes during a Sensor Dry Cycle: • Press PAUSE/CANCEl ..... • Adjust I)ryness. • MORE • NORMAL _p• less DRYNESS ONlY NOTE: I)ryness selections can be made only while using Sensor I)ry Cycles. How the Sensi-Care TM Drying System Works Moisture-sensing strips and temperature sensors inside the dryer drum monitor how fast the load is drying, how hot the air should be and when clothes are dry. The system automatically stops the cycle to help save time and avoid overdrying. To use a Timed Cycle • Turn knob to desired Timed Cycle. Press the TIMED CYCI.E ADJUST up or down arrows until the desired drying time is displayed. Press the up or down arrows and the time will change by 1 -minute intervals. Press and hold the up or down arrows and the time will change by 5-minute intervals. NOTE: The Timed Cycle Adjust features can be used only with Timed Cycles. ®@ TIMED CYCLE ADJUST • Press TEMP until the desired temperature illuminates. • MEDIUM • LOW TEMP ADJUST TIMED CYCES NOTE: The Temp feature can be used only with Timed Cycles. NOTE: I)uring a Timed Cycle, you can change the settings for Time, Temp, the Wrinkle Prevent setting and the End of Cycle Signal 5° (OPTIONAl_ STEP) If desired, select OPTIONS. For more details, see "Options." 6. (OPTIONAl_ STEP) If desired, press ENID OF CYCI_E SIGNAl_. A signal will sound to alert you when a cycle ends. For more details, see "End of Cycle SignaL" 7° Press START. Be sure the door is closed. • If you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off. • If you wish to end your drying cycle after pressing Start, press PAUSE/CANCEl. twice. _.,+X,