Maytag MGD6300TQ Use and Care Guide - Page 18
Options and Cycle Signal settings selected.
View all Maytag MGD6300TQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Cycle tips • Dry most loads using the preset cycle settings. • Refer to the Sensor Dry or Timed Preset Cycle Settings chart (in the "Cycles" section) for a guide to drying various loads. • Drying temperature and dryness [eve[ are preset when you choose a Sensor Dry Cycle. You can select a different dryness [eve[, depending on your load, by pressing Dryness and choosing More, Normal I_ess or Damp. NOTE: You cannot use the Timed Cycle Adjust and you cannot choose a Temperature with the Sensor Dry Cycles. • If you wish to adjust the cycle length of a Timed Cycle, press the Timed Cycle Adjust up or down arrows. Adjust the temperature of a Timed Cycle by pressing Temp until the desired temperature is selected. NOTE: You cannot choose a dryness [eve[ with Timed Cycles. Select the drying cycle that matches the type of load you are drying. See Sensor Dry or Timed Preset Cycle Settings charts. SENSOR DRY CYCLES TIMED CYCLES LFRESHEN UP DRY CYCLES Follow the progress of your dryer with the drying Status indicator lights. SENSING WET _0 • DAMP • COOL DOWN • WRINKLE DRY PREVENT • Oj Sensing • In a Sensor Dry Cycle, the Sensing light illuminates until a wet item is detected. • In a Timed Cycle, the Sensing light illuminates at the beginning of a cycle and turns off 5 minutes into the cycle. Wet The Wet light illuminates at the beginning of a Sensor Dry Cycle if a wet item is detected. • In a Sensor Dry Cycle, if a wet item is not detected after approximately 5 minutes, the dryer goes directly into Coo[ Down. The Coo[ Down and the Wrinkle Prevent setting indicators will illuminate, if selected. • In a Timed Cycle, wet items are not detected. The dryer will continue to run for the length of time selected, and the Wet light will illuminate. The damp light will not illuminate. Damp The Damp light illuminates in a Sensor Dry Cycle when the laundry dry. Damp Dry Chime beeps, if selected. See "Options." is approximately 80% Cool Down The Coo[ Down light illuminates ease in handling. during the coo[ down part of the cycle. I.aundry cools for Dry The Dry light illuminates Wrinkle Prevent setting. when the drying cycle is finished. This indicator stays on during the Wrinkle Prevent Setting The Wrinkle Prevent setting light illuminates on during the Wrinkle Prevent setting. when this option is selected. This indicator stays Indicator lights Other indicator lights show Cycle, Modifiers, Options and Cycle Signal settings selected. The display shows the estimated or actual time remaining. 18 .... Sensor Dry Cycles Sensor Dry Cycles allow you to match the cycle to the load you are drying. See the following Sensor Dry Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically time for optimal drying. adjusts the drying Heavy Duty Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans. Normal Use this cycle to get medium heat for drying sturdy fabrics such as work clothes and sheets. Wrinkle Control Use this cycle to get low heat for drying no-iron fabrics, such as sport shirts, casual business clothes and permanent press blends. Delicate Use this cycle to get extra-low knit fabrics. heat to gently dry items such as lingerie, blouses or washable Sensor Dry Preset Cycle Settings Sensor Dry Cycles Load Type HEAVY DUTY Heavyweight mixed loads, cottons, jeans NORMAL Corduroys, work clothes, sheets WRINKLE CONTROL Business casual clothes, permanent press, synthetics DELICATE Lingerie, blouses, washable knit fabrics Temperature High Medium I.ow Extra-I_ow