Motorola WR850G User Manual - Page 20
Connection to Router, Configuration - repeater
UPC - 612572095027
View all Motorola WR850G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
INSTALLATION Connection to Router SECTION 2 ETHERNET USB CABLE CUSTOMER S/N:BCDFGHJKLMNP S/N: PPPPMMYJJJSSSSSCAABBCCCC HFC MAC ID: ABCDEF012345 USB CPE MACID:ABDCEF012345 +12VDC Reset Power LAN 4 3 2 1 WAN When connecting your PC to the router, your PC must be installed first with an Ethernet adapter. You need two Ethernet cables for this procedure, one cable to connect the router to the modem and one cable to connect a PC to the router. 1 A. If you have been running broadband to a single computer before, unplug the Ethernet cable (that runs between your modem and PC) from the back of your PC and plug it into the port labeled WAN on the back of your router. B. If you have not been running broadband to a single computer, take one end of an Ethernet cable and plug it into the WAN port. The WAN port is the only port that works for your connection from the modem to the router. 2 Take the other end of the same cable and plug it into your cable or DSL modem. You have now connected the router to the modem. 3 To connect the PC to the router, use a different Ethernet cable and plug it into your Ethernet port on your PC. 4 Use the other end of the same cable and plug it into one of the LAN ports on your router. You have now connected your PC to the router. 5 To connect more devices, repeat steps 4 and 5. 6 To configure the router, refer to Section 3: Configuration. SECTION 2, INSTALLATION 2-7