Motorola WR850G User Manual - Page 55
NETWORKING, PORT TRIGGER, APPLY, CANCEL, enable, Update, Remove, Outgoing Protocol, Outgoing Port
UPC - 612572095027
View all Motorola WR850G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
SECTION 3 CONFIGURATION To access the screen, click NETWORKING > PORT TRIGGER. Click APPLY to save your settings or CANCEL to cancel changes. 3-24 To add a Port Trigger entry: 1 Port Trigger Name: Enter the name of the application. There is a limit of 32 characters for the name. Click to enable if you wish it to become active. Otherwise, you can save the information and enable it at later date. To enable at a later date, select the entry, check enable, then click Update. 2 Outgoing Protocol: From the drop down box, select from TCP, UDP, or Both. 3 Outgoing Port: Enter the From and To ranges (0 to 65535) for your application. 4 Trigger Incoming Protocol: From the drop down box, select from TCP, UDP, or BOTH. 5 Incoming Port Range: Enter continuous value(s) (0 to 65535), separated by dashes, for your application. You can also enter multiple non-continuous values, separated by semicolons. 6 Port Trigger Idle Time: Enter the elapsed time before the port mapping closes. To update or remove an entry, select it and then click Update or Remove to perform the action. SECTION 3, CONFIGURATION