NEC NP-UM330X NP04WK1 Installation Manual
NEC NP-UM330X Manual
 |
View all NEC NP-UM330X manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP-UM330X manual content summary:
- NEC NP-UM330X | NP04WK1 Installation Manual - Page 1
Wall Mount Unit NP04WK/NP04WK1 Installation and Adjustment Manual NP04WK-IAM-01 - NEC NP-UM330X | NP04WK1 Installation Manual - Page 2
mount unit. Please read this installation and adjustment manual carefully to ensure proper use. For a list of the supported projectors, please see the NEC website or NEC catalogs. The descriptions in the installation and adjustments manual are mainly for the NPUM330X. Special skills are required - NEC NP-UM330X | NP04WK1 Installation Manual - Page 3
Symbol expresses compulsory actions. Concrete instructions are specified in figures. Warning be sure to do so as explained in this manual. The projector may fall and cause injury if installed fasten it so as to ensure sufficient strength to support the combined weight of the projector, the wall mount - NEC NP-UM330X | NP04WK1 Installation Manual - Page 4
to view. • Avoid locations exposed to particularly high or low temperatures. Doing so may result in breakdown. (For the ambient operating temperature, see the user's manual included with the projector.) ENG-3 - NEC NP-UM330X | NP04WK1 Installation Manual - Page 5
on Installation: 1 These include safety precautions on installing the wall mount unit, a list of the included parts and the specifications. Quick Install Guide: 1 This provides a simple description of the installation and adjustment procedures. M6×10 mm screws: 4 These are used to mount the wall - NEC NP-UM330X | NP04WK1 Installation Manual - Page 6
M Names of Parts Elongated wall mount screw holes (Wall adapter) Cable hole Wall adapter cover Wall adapter cover Fixing screw (A) (Arm unit) Vertical position reference line Wall adapter (wall adapter unit + arm unit) View from above Slide arm Cap Left/right tilt adjustment knob Safety - NEC NP-UM330X | NP04WK1 Installation Manual - Page 7
M Dimensions of Parts The following shows an external view of the wall mount unit, the positions of the wall adapter's wall mount screws and the amount of movement when mounting the projector. Units: mm 530 Center of wall adapter 60 572 (min.) to 994 (max.) (When wall plate mounted: 575 (min.) to - NEC NP-UM330X | NP04WK1 Installation Manual - Page 8
M Projection Distance and Screen Size The following shows the projection distance and screen size as well as the optimum height of the projector and screen. Refer to the dimensions on the diagram to determine the position of installation, then perform the mounting procedure. CAUTION - When the - NEC NP-UM330X | NP04WK1 Installation Manual - Page 9
31.5 65.8 38.8 73.2 Height between wall adapter's lower edge screw hole center and screen's upper edge - H1 (cm) 21.2 23.1 25.4 27.6 29.9 NP-UM330W/NP-UM280W Screen Size (D) W (width) x H2 (height) (cm) 58 124.9 78.1 60 129.2 80.8 70 150.8 94.2 80 172.3 107.7 90 193.9 121.2 100 - NEC NP-UM330X | NP04WK1 Installation Manual - Page 10
the front. 2. Check that the position of installation meets the conditions in "Be sure to read before installing" on page ENG-2 of these instructions. - Because the elevation angle of the projector's optical axis is large, small shifts in the projection distance will change the size and position of - NEC NP-UM330X | NP04WK1 Installation Manual - Page 11
2. Attach the wall adapter to the wall's structural material. Use the included washers and spacers to attach the wall adapter with the M6 screws (or bolts). - For the position for mounting the wall adapter onto the wall and the dimensions, see "Dimensions of Parts" on page ENG-6 and "Projection - NEC NP-UM330X | NP04WK1 Installation Manual - Page 12
4. Insert the slide arm on the arm unit. Arm unit Slide arm 5. Attach the safety lock screws and fixing screws (B). (1) Use the included hexagonal wrench to securely tighten the two safety lock screws. (2) Leave the two fixing screws (B) loose. Tighten them after adjustments are made. (2) Fixing - NEC NP-UM330X | NP04WK1 Installation Manual - Page 13
6. Make the initial setting of the arm unit's vertical position. Upon shipment from the factory, the arm unit is set to the uppermost position. (1) Loosen the arm unit's fixing screw (A), then holding the arm unit's base, lower the arm unit to the lowermost position. (2) Temporarily fasten the - NEC NP-UM330X | NP04WK1 Installation Manual - Page 14
7. Cabling The power cord and signal cable(s) can be passed through the slide arm and wall adapter. There is one cable hole in the slide arm and three cable holes in the wall adapter (upward, throughto-wall and downward). Select the cable holes to be used according to the cabling conditions. (1) - NEC NP-UM330X | NP04WK1 Installation Manual - Page 15
, then first move the projector's focus ring to roughly adjust the focus of the projected image. For instructions on projecting images, see "Projecting Images (Basic Operation)" of the user's manual (CD-ROM) supplied with the projector. - At "Installation" or "Settings" on the on-screen menu, select - NEC NP-UM330X | NP04WK1 Installation Manual - Page 16
2. Adjust the projector's tilt in the vertical direction. Turn the vertical tilt adjustment knob and adjust so that the left and right edges of the projected image are parallel. - The adjustment range is ±5°. Vertical tilt adjustment knob 3. Adjust the projector's tilt in the rotational direction. - NEC NP-UM330X | NP04WK1 Installation Manual - Page 17
screws (B). (2) Holding the slide arm's cap, move forward or back- ward to project the image over the entire screen. - When installed following the instructions under "Projection Distance and Screen Size", the image is projected at about the center. - The slide arm moves a maximum of 422 mm. - In - NEC NP-UM330X | NP04WK1 Installation Manual - Page 18
5. Adjust in the vertical direction. Loosen the fixing screw (A), then hold the base of the arm and move the arm upwards, targeting the reference line. Adjust so that the projected image is at the center of the screen surface. * If the projected image moves too far upwards with respect to the screen - NEC NP-UM330X | NP04WK1 Installation Manual - Page 19
7. Once the adjustments are completed, securely tighten all the screws that were loosened. 8. Attach the covers to the wall adapter. Cover (A) and cover (B) have the same shape. Attaching the covers (1) Push one of the covers onto the wall adapter. - The four tabs on the back of the cover fit into - NEC NP-UM330X | NP04WK1 Installation Manual - Page 20
9. Attach the cable cover to the projector. For instructions on attaching the cover, see the user's manual. WARNING - Do not bundle the power cord together with the cables and put it under the cable cover. Doing so could result in fire. This completes installation and adjustment. ENG-19 - NEC NP-UM330X | NP04WK1 Installation Manual - Page 21
Specifications Product name : Wall mount unit Model name : NP04WK Adjustable angles : Vertical angle - ±5°; Horizontal angle - ±5°; Tilt angle - ±5° Adjustable positions : Front/back - 422; Horizontal - ±50 mm; Vertical - ±40 mm External dimensions : 530 (W) x 572 (D) x 223 (H) mm (NP04WK1;
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
 |
 |
Wall Mount Unit
NP04WK/NP04WK1
Installation and Adjustment Manual
NP04WK-IAM-01