NEC NP-UM330X NP02Wi Installation Manual - Page 11
ENG-9
View all NEC NP-UM330X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3. Tighten the screw at the center of the sensor unit to fasten the sensor unit to the projector. NOTE • To ensure safety, be sure to tighten the screw securely. Failure to do so may result in the sensor unit falling and causing injury. • Hold the sensor unit, and do not lift the projector. Lifting the projector could damage the sensor unit. 4. Pass the L-shaped connector side of the included USB cable through the projector's security bar and insert it into the sensor unit's USB port (type B). ENG-9
ENG-9
3.
Tighten the screw at the center of the sensor unit to fasten the sensor unit to the
projector.
NOTE
•
To ensure safety, be sure to tighten the screw securely. Failure to do so may result in the
sensor unit falling and causing injury.
•
Hold the sensor unit, and do not lift the projector. Lifting the projector could damage the
sensor unit.
4.
Pass the L-shaped connector side of the included USB cable through the projector’s
security bar and insert it into the sensor unit’s USB port (type B).