NVIDIA GeForce2 User Manual - Page 13

from Windows®9x/Windows®Me system before you remove the existing hardware. 2. To added a new adapter, make sure the mainboard that has available IRQ for new devices, and there is no conflict between the others. 3. If you try add this video adapter to ALL-IN-ONE mainboards (which video port built-in already), then you have to disable that port first. Otherwise, that will be a problem for the new video adapter setup. 4. The driver installation for upgrade system as same as above, if error occur when you proceed step 1,2 or 3, please consult with your system dealer or the existing hardware manufacturer support. ÿ Windows® 2000 Display Driver: Microsoft Windows®2000 detects this device and placed appropriate display driver from its operating system automatically, it doesn't matter you have add a new or change the existing one. To maximum the video board acceleration and breadth its performance, you may install the manufacturer display driver as the followings: 1. Insert the software' CD into your CD-ROM drive (e.g. X:). 2. Autorun file pops up "Welcome screen" from software' CD. 3. Click on the "Display Driver" selection bar. 4. Switch to "Settings" tab, then click on " Advance" button. 5. Tab on "Adapter" screen, if there is any. 6. Click on "Change", then "Have Disk". 7. Browse to "X:\MX\Win2k\Jatonagp.INF (X is the letter of your CD-ROM drive; typically, D: or E:, etc.), and click OK. 13