Navigon 10000140 User Guide - Page 23
Inserting a memory card, Securing the cradle, Securing the navigation device to the cradle
UPC - 898110001051
View all Navigon 10000140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Getting Started Preparing Your NAVIGON 7100 for Use Inserting a memory card The SD memory card contains maps and navigation software. It also stores saved destinations, routes, and logbook entries. • Insert the memory card provided into the slot on the top of the device (see image). Press the card into the device until it locks into place. Removing a memory card 1. Switch the navigation device off by pressing the (On/Off/Standby) switch for at least 6 seconds. 2. Press the memory card gently into the device until the lock disengages. Securing the cradle Clean and dry the windshield as well as the suction cup on the base of the cradle. These areas must be dry and free of dirt and grease. 1. Use the suction cup to affix the cradle to the windshield. The cradle should be as level as possible. 2. Press the lever on the suction cup down to secure the cradle. Securing the navigation device to the cradle The navigation device is secured to the cradle by means of a bayonet fitting. This connection functions in a similar way to attaching a lens to a camera. 1. Place the navigation device on the bayonet in such a way that the bulges on the bayonet ring correspond exactly with the recesses on the cradle. This is achieved by rotating it approx. 30° to the left. 2. Turn the navigation device clockwise until the bayonet fitting locks into place. 3. Adjust the navigation device so that it can be seen easily. January 2008 NAVIGON 7100 User's Guide 11 Revision 2.0 NAVIGON, INC.