Navigon 10000140 User Guide - Page 89

Bluetooth (Hands-Free Operation) Connecting to a Telephone Connecting to a Telephone NAVIGON 7100 must be connected to a mobile phone in order to use the telephone functions. Pairing with a mobile phone Pairing describes the procedure involved when connecting two Bluetooth devices for the first time. It is necessary to enter a password into both devices in the process. This password is stored on both devices, so that further entry is not necessary by subsequent connections. Pairing must be initiated from the mobile phone. See your mobile phone user's manual if you are uncertain about how to carry out the following steps on the mobile phone. 1. Ensure that Bluetooth is activated on the mobile phone. 2. Using the mobile phone, search for other Bluetooth devices. The navigation device is detected as NAVIGON 7100. 3. Initiate a connection to the detected NAVIGON 7100 device. You are prompted to enter the mobile phone password. 4. Enter a four digit password (user defined). On NAVIGON 7100, the PASSKEY REQUESTED WINDOW opens. 5. In the Passkey field, enter the same password that was entered in the mobile phone. 6. Tap > OK. The BLUETOOTH HF PHONE WINDOW opens. A connection is established between the two devices. At the bottom edge of the screen, the name of the connected mobile phone is displayed. Connecting to a mobile phone The word connect describes any subsequent connections between paired Bluetooth devices. No further password entry is necessary when connecting. Connections must be initiated using NAVIGON 7100. Ensure that Bluetooth is activated on the mobile phone. In the BLUETOOTH HF PHONE WINDOW: • Tap (Connect). A connection is established between the two devices. At the bottom edge of the BLUETOOTH HF PHONE WINDOW, the name of the connected mobile phone is displayed. January 2008 NAVIGON 7100 User's Guide 77 Revision 2.0 NAVIGON, INC.