Navigon 10000140 User Guide - Page 28
Initializing the GPS receiver, Setting the volume, GPS Ready, Caution
UPC - 898110001051
View all Navigon 10000140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Basic Operations Starting the NAVIGON 7100 Initializing the GPS receiver Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first time. Each time you turn on the device, GPS reception starts within one minute. If the navigation device has been switched off for more than a week, the next initialization can take up to 10 minutes. As soon as the navigation device has been switched on, initialization of the GPS receiver begins. In the upper right-hand corner of the display, the GPS symbol appears. As soon as data from at least 3 satellites is received, the symbol changes to GPS Ready. Note: If the GPS symbol displays GPS Ready after considerably less than 20 minutes, it is advisable to leave the receiver switched on for at least 15 minutes to ensure reliable operation. Caution! If you have connected the navigation device to the power supply via the vehicle's cigarette lighter, remove the connector before you leave the vehicle for a long period of time. As the GPS receiver requires a constant supply of power, it could drain the vehicle´s battery. Setting the volume The volume of the spoken driving instructions can be adjusted during navigation. With a map displayed: 1. Tap (Volume) to open the volume bar. The volume bar opens. It contains three buttons for adjusting the volume: (Louder), (Quieter), (Volume on/off). 2. Tap (Volume) to close the Volume bar. 16 NAVIGON 7100 User's Guide January 2008 NAVIGON, INC. Revision 2.0