Netgear FS728TP-100NAS FS728TP User Manual - Page 178
Maintenance, Troubleshooting, Diagnostics, Cable Test, Interface, Test Result, Cable Fault Distance
View all Netgear FS728TP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual To test cables: 1. Click Maintenance > Troubleshooting > Diagnostics > Cable Test. The Cable Test screen displays: Figure 8-6 The Cable Test screen contains the following fields: • Interface - Enter the port to which the cable is connected. • Test Result - Displays the cable test results. Possible values are: - No Cable - A cable is not connected to the port. - Open Cable - A cable is connected on only one side. - Short Cable - A short has occurred in the cable. - OK - The cable passed the test. • Cable Fault Distance - Displays the distance from the port where the cable error occurred. • Last Update - Displays the last time the port was tested. • Test - The test results are displayed. Maintenance 8-7 v1.0, December 2007