Netgear FS728TP-100NAS FS728TP User Manual - Page 19
NIC Setting on the Host that Accesses the FS728TP 10/100 PoE Smart Switch with Gigabit Ports, Disable
View all Netgear FS728TP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual . Figure 1-3 7. Select Disable to disable DHCP. 8. The default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. If you want different values, enter the switch IP address, gateway IP address and subnet mask. 9. Type your password and click Set. Please ensure that your PC and the FS728TP 10/100 PoE Smart Switch with Gigabit Ports are in the same subnet. Note the settings for later use. NIC Setting on the Host that Accesses the FS728TP 10/100 PoE Smart Switch with Gigabit Ports The settings of your Network Interface Card (NIC) under MS Windows OS are made with entries into Windows screens similar to the ones shown below. For comparison, the settings screens of the switch are also shown although they do not appear in the Windows view. 1-6 Getting Started with Switch Management v1.0, December 2007