Netgear FS728TP-100NAS FS728TP User Manual - Page 96
CST Port Configuration
View all Netgear FS728TP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual CST Port Configuration To configure CST ports on the device: 1. Click Switching > STP > Advanced > CST Port Configuration. The CST Port Configuration screen displays: Figure 4-19 The CST Port Configuration screen contains the following fields: • Interface - Displays the port or LAG for which the STP information is displayed. • STP Status - Select the STP status on the interface. The possible field values are: - Enable - Enable STP on the interface. - Disable - Disable STP on the interface. • Fast Link - Select the Fast Link state on the interface. If Fast Link mode is enabled for a interface, the Port State is automatically placed in the Forwarding state when the port link is up. Fast Link optimizes the STP protocol convergence. The possible field values are: - Enable - Enable Fast Link on the interface. - Disable - Disable Fast Link on the interface. Configuring Switching Settings v1.0, December 2007 4-27