Netgear FVX538v1 How to set up a DMZ LAN on the FVX538? - Page 3

Apply, Security->Firewall Rules->DMZ WAN Rules

Get Netgear FVX538v1 - ProSafe VPN Firewall Dual WAN PDF manuals and user guides View all Netgear FVX538v1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

After clicking Apply, you should be able to connect devices to the DMZ port (8) on the FVX538. Static addresses given to those devices will be set to the 172.16.0.x subnet with a gateway of 172.16.0.1, which is the router's DMZ IP address. Next, we'll configure the FTP and HTTP servers' firewall rules. If we have set the FTP server's static IP to be 172.16.0.20 and the HTTP server's IP to be 172.16.0.80, then we'll use the following settings: Go to the Security->Firewall Rules->DMZ WAN Rules menu:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
After clicking
Apply
, you should be able to connect devices to the DMZ port (8) on the FVX538. Static
addresses given to those devices will be set to the 172.16.0.x subnet with a gateway of 172.16.0.1,
which is the router’s DMZ IP address.
Next, we’ll configure the FTP and HTTP servers’ firewall rules. If we have set the FTP server’s static IP to
be 172.16.0.20 and the H
TTP server’s IP to be 172.16.0.80, then we’ll use the following settings:
Go to the
Security->Firewall Rules->DMZ WAN Rules
menu: