Netgear GS108T GS108T Setup Manual - Page 101
Reset, Factory Reset, password - reset to default
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
GS108T Smart Switch Software Administration Manual 2. Click Factory Reset to reset the system. • If there is no DHCP server on the network, the IP address will become 192.168.0.239. • The password will return to the factory default password. Reset Reset enables you restart the switch with its current configuration. Note: You can also use the Reset button on the front panel to reset the switch to its current configuration. To reset and restart the switch: 1. Click Reset in the blue navigation panel. A screen similar to that shown below appears. . Figure 5-62 2. Click Reset to restart the switch. Managing Firmware and Reset Options 5-5 v1.0, May 2007
GS108T Smart Switch Software Administration Manual
Managing Firmware and Reset Options
5-5
v1.0, May 2007
2.
Click
Factory Reset
to reset the system.
•
If there is no DHCP server on the network, the IP address will become
192.168.0.239
.
•
The password will return to the factory default
password
.
Reset
Reset
enables you restart the switch with its current configuration.
To reset and restart the switch:
1.
Click
Reset
in the blue navigation panel. A screen similar to that shown below appears.
.
2.
Click
Reset
to restart the switch.
Note:
You can also use the Reset button on the front panel to reset the switch to its current
configuration.
Figure 5-62