Netgear GS108T GS108T Setup Manual - Page 98
Firmware Upload, Configuration Upload, Apply, Enter the IP Address of the TFTP Server.
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
GS108T Smart Switch Software Administration Manual . Figure 5-59 2. Click Firmware Upload or Configuration Upload to select the type of file for upload. 3. Click TFTP or HTTP to select the upload mode. If the TFTP mode is selected: a. Enter the IP Address of the TFTP Server. b. Enter the name of the firmware or configuration destination file in the TFTP server. If the HTTP mode is selected: a. Enter the name of the firmware or configuration destination file in the HTTP Host. 4. Click Apply to start the upload. 5-2 Managing Firmware and Reset Options v1.0, May 2007
GS108T Smart Switch Software Administration Manual
5-2
Managing Firmware and Reset Options
v1.0, May 2007
.
2.
Click
Firmware Upload
or
Configuration Upload
to select the type of file for upload.
3.
Click
TFTP
or
HTTP
to select the upload mode.
If the
TFTP
mode is selected:
a.
Enter the IP Address of the TFTP Server.
b.
Enter the name of the firmware or configuration destination file in the TFTP server.
If the
HTTP
mode is selected:
a.
Enter the name of the firmware or configuration destination file in the HTTP Host.
4.
Click
Apply
to start the upload.
Figure 5-59