Netgear GSM7252PS 7200 Series Managed Switch CLI Refernce Manual for Software - Page 214

Source: local Priority: low ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3 show lldp med remote-device This command displays summary information about remote devices that transmit current LLDP MED data to the system. You can show information about LLDP remote data received on all ports or on a specific port. Format Mode show lldp med remote-device { | all} Privileged EXEC Term Interface Device Class Definition The interface in a unit/slot/port format. The Remote device's MED Classification. There are four different kinds of devices, three of them represent the actual end points (classified as Class I Generic [IP Communication Controller etc.], Class II Media [Conference Bridge etc.], Class III Communication [IP Telephone etc]). The fourth device is Network Connectivity Device, which is typically a LAN Switch/Router, IEEE 802.1 Bridge, IEEE 802.11 Wireless Access Point etc. Example: The following shows example CLI display output for the command. (Switch) #show lldp med remote-device all LLDP MED Remote Device Summary Local Interface --------1/0/8 1/0/9 1/0/10 1/0/11 1/0/12 Remote ID --------- 1 2 3 4 5 Device Class Class I Not Defined Class II Class III Network Con Switching Commands v1.0, May 2010 3-176