Netgear GSM7252PS 7200 Series Managed Switch CLI Refernce Manual for Software - Page 54

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3 no spanning-tree max-age This command sets the Bridge Max Age parameter for the common and internal spanning tree to the default value. Format Mode no spanning-tree max-age Global Config spanning-tree max-hops This command sets the MSTP Max Hops parameter to a new value for the common and internal spanning tree. The max-hops value is a range from 6 to 40. Default Format Mode 20 spanning-tree max-hops Global Config no spanning-tree max-hops This command sets the Bridge Max Hops parameter for the common and internal spanning tree to the default value. Format Mode no spanning-tree max-hops Global Config spanning-tree mst This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance or in the common and internal spanning tree. If you specify an parameter that corresponds to an existing multiple spanning tree instance, the configurations are done for that multiple spanning tree instance. If you specify 0 (defined as the default CIST ID) as the , the configurations are done for the common and internal spanning tree instance. Switching Commands v1.0, May 2010 3-16