Netgear GSM7252PS 7200 Series Managed Switch CLI Refernce Manual for Software - Page 52

ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3 spanning-tree forceversion This command sets the Force Protocol Version parameter to a new value. Default Format Mode 802.1s spanning-tree forceversion Global Config • Use 802.1d to specify that the switch transmits ST BPDUs rather than MST BPDUs (IEEE 802.1d functionality supported). • Use 802.1s to specify that the switch transmits MST BPDUs (IEEE 802.1s functionality supported). • Use 802.1w to specify that the switch transmits RST BPDUs rather than MST BPDUs (IEEE 802.1w functionality supported). no spanning-tree forceversion This command sets the Force Protocol Version parameter to the default value. Format Mode no spanning-tree forceversion Global Config spanning-tree forward-time This command sets the Bridge Forward Delay parameter to a new value for the common and internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being greater than or equal to "(Bridge Max Age / 2) + 1". Default Format Mode 15 spanning-tree forward-time Global Config Switching Commands v1.0, May 2010 3-14