Netgear GSM7328Sv2 GSM7328Sv2/GSM7352Sv2 Series Managed Switch Hardware Instal - Page 13
SPD LED, Table, LED Descriptions for GSM7328S v2 continued, Link/ACT LED, Solid green, Blinking green
View all Netgear GSM7328Sv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation Table 2-1. LED Descriptions for GSM7328S v2 (continued) LED Description 10/100/1000M Ports (2 LEDs per port) SFP Ports (1Link/ACT LED per port) SFP+ Ports (1 Link/ACT LED per port) Link/ACT LED • Off: No link is established on the port. • Solid green: A valid link is established on the port. • Blinking green: The port is sending or receiving packets. SPD LED • Off: No link is established on the port. • Solid yellow: A valid 10/100 Mbps link is established on the port. • Solid green: A valid 1000 Mbps link is established on the port. Note: If port 21-24 media is changed to SFP, the RJ-45 LEDs change to OFF status. • Off: No SFP module link is established on the port. • Solid green: A valid 1000Mbps SFP module link is established on the port. • Blinking green: Packet transmission or reception is occurring on the port at 1000Mbps. • Solid yellow: A valid 100Mbps SFP module link is established on the port. • Blinking yellow: Packet transmission or reception is occurring on the port at 100Mbps. Note. If port 21-24 media is changed to copper, the SFP LEDs change to OFF status. SPD/Link/ACT LED: • OFF: No SFP module link is established on the port. • Solid green: A valid 10Gbps SFP+ module link is established on the port. • Blinking green:Packet transmission or reception is occurring on the port at 10Gbps. Introduction 2-3 v1.0, July 2009