Netgear WG302 WG302v1 Reference Manual - Page 19

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302 • WG511T 802.11g 108 Mbps Wireless CardBus Adapter • WG511 802.11g 54 Mbps Wireless CardBus Adapter • WG111 801.11g 54 Mbps Wireless Bridge System Requirements Before installing the WG302, make sure your system meets these requirements: • A 10/100 Mbps Local Area Network device such as a hub or switch • The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the package, or one like it • A 100-240 V, 50-60 HZ AC power source • A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or Netscape Navigator 4.78 or above • At least one computer with the TCP/IP protocol installed • 802.11b or 802.11b-compliant devices, such as the NETGEAR WG511 Wireless Adapter What's In the Box? The product package should contain the following items: • NETGEAR ProSafe Wireless Access Point 802.11g WG302 • Power adapter and cord (12 V dc, 1.2 A) • Straight through Category 5 Ethernet cable • WG302 802.11g ProSafe Wireless Access Point Installation Guide • Resource CD for the NETGEAR WG302 ProSafe 802.11g Wireless Access Point This Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302 • Support Registration card Contact your reseller or customer support in your area if there are any missing or damaged parts. You can refer to the Support Information Card for the telephone number of customer support in your area. You should keep the Support Information card, along with the original packing materials, and use the packing materials to repack the WG302 if you need to return it for repair. To qualify for product updates and product warranty registrations, we encourage you to register on the NETGEAR Web site at: http://www.NETGEAR.com. Introduction 2-5 September 2004